2M Extension Supply Cable for Electric Linear Actuators Type A, B or J with Hall Effect Sensor (Model 0043046) 8 Channels Dry Contact Output Turn the knob switch to

Turn the knob switch to a position in its travel

you need to reset the system as follows

for a linear actuator with a stroke of 300mm

5~1A at 24V Full Load Current 6~12A at 12V or 3~6A at 24V Recommended Power Supply 12V/10A or 24V/5A Shaft Diameter 24mm [0

you can also choose to retain the original standard retraction length of 350 mm

2M Extension Supply Cable for Electric Linear Actuators Type A, B or J with Hall Effect Sensor (Model 0043046) 8 Channels Dry Contact Output Turn the knob switch toThe six core power cable of the electric linear actuator type A, B or J with hall effect sensor is only 1. 5 meters. If you need a longer power cable, please purchase this extension cable. This extension cable is 2 meters long, it has a female plug and a male socket, you can use it to extend the distance between the linear actuators and synchronization controller. If you want to extend the distance between 1 linear actuator and synchronization